•When the handset ringer volume is set to OFF, it will not ring (p. 18).
When a call is received, the unit rings and “Incoming call” is
displayed and the IN USE/CHARGE/HOLD indicator on the base unit
flashes quickly. If you subscribe to a Caller ID service, the calling party
information will be displayed after the first ring (p. 26).
In order to view the Caller ID information, please wait until the second ring
to answer a call.
If the handset is off the base unit;
Press .
•You can also answer a call by pressing any dialing
button (0) to (9), (*) or (#) (—Any Key Talk).
OR
Press , and when the other party answers,
talk into the microphone.
•You can select the ringer volume while a call is being received. Press Ö or Ñ
while the handset is just ringing. To set to OFF, press and hold Ö.
Auto Talk
If you set the Auto Talk feature to ON
(p. 17), you can answer a call by lifting the
handset off the base unit without pressing
or .
25
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Answering Calls
To Next Page
Loading...
