Panasonic KX-TG2335S - Transferring Calls Between Units; Transferring Handset to Base Unit Call; Transferring Base Unit to Handset Call

For assistance, please call: 1-800-211-PANA(7262)
39
Advanced Operation
Transferring a Call
You can transfer an outside call to the base unit or the handset.
From the to the
From the to the
1 Handset:
(1)
During a call, press [HOLD/INTERCOM] .
• The call is put on hold.
(2) Press Base.
(3) Wait for the paged party to answer, then
you can announce the transfer.
• If the paged party does not answer, press [C]
or [s] to return to the outside call.
• After the paged party answers, “Intercom
hold” is displayed.
2 Base unit:
Press [SP-PHONE] or [LOCATOR/INTERCOM] to answer the page.
3 Handset: To complete the transfer, press [OFF].
1 Base unit: During a call, press [LOCATOR/INTERCOM] .
• The call is put on hold.
• If the paged party does not answer, press [LOCATOR/INTERCOM] to return
to the outside call.
2 Handset: Press [C], [s] or [HOLD/INTERCOM] to answer the page.
• Any button except [ d ], [ B ] or [OFF] can be pressed to answer the page.
3 Base unit: To complete the transfer, press [SP-PHONE].
Handset Base Unit
Line on hold.
Transfer to
Base
K
Hold
Calling Base
Base Unit Handset
PQQX13985YA.book 39 ページ ２００４年１月２２日 木曜日 午後５時８分