For assistance, please call: 1-800-211-PANA(7262)
41
Advanced Operation
Conference Calls
While you are talking with an outside caller, the base unit user or the handset user
can join the conversation and establish a conference call.
• To leave the conference, press [OFF] on the handset or press [SP-PHONE] on
the base unit. The two other parties can continue the conversation.
• During a conference, the outside call can be placed on hold by pressing
[HOLD/INTERCOM] on the handset or [HOLD/CONF] on the base unit. Only the
person who placed the call on hold can resume the full conference by pressing
Conf on the handset or [HOLD/CONF] on the base unit.
Call Share
This feature allows the base unit or the handset to join an existing outside call.
To join a conversation (Call Share)
Press [C] or [s].
•“Conference” is displayed.
Press [SP-PHONE].
1 During a call, press
[HOLD/INTERCOM].
• The call is put on hold.
2 Press Base.
3 When the paged party answers,
press Conf on your unit to
make a conference call.
•“Conference” is displayed
during a conference call.
Handset
1 During a call, press
[LOCATOR/INTERCOM].
• The call is put on hold.
2 When the paged party answers,
press [HOLD/CONF] on your
unit to make a conference call.
Base Unit
Handset
Base Unit
PQQX13985YA.book 41 ページ ２００４年１月２２日 木曜日 午後５時８分
To Next Page
Loading...
