27
Cordless Telephone
To dial after confirming the entered number
1
Dial a phone number.
•If you misdial, press (INTERCOM/CLEAR) and
dial again.
2
Press (TALK).
•After a few seconds, the display will show the
length of the call and the battery strength.
3
To hang up, press (TALK) or place the
handset on the base unit.
To redial after confirming the last number dialed
Press (REDIAL/PAUSE) and press (TALK).
To adjust the receiver volume while talking
To increase, press Ñ.
To decrease press Ö.
•Each time you press Ö or Ñ, the
volume level will change.
•The display will return to the length of
the call.
Lighted handset keypad
The handset dialing buttons will light when you press a button or lift the
handset off the base unit, and flash when a call is received. The lights will
go out a few seconds after pressing a button, lifting the handset or
answering a call.
Backlight LCD display
The lighted handset display will stay on for a few seconds after pressing a
handset button or lifting the handset off the base unit.
Talk
3334444
Talk
00-00-00
Loud
Low ❚❚❚❚❚❚ High
3334444
MEDIUM
HIGH
LOW
Loud
Low ❚❚❚❚ High
Loud
Low ❚❚ High
Off
00-01-08
ÖÑ
ÖÑ
To Next Page
Loading...
