While the handset is off the base unit:
Press Ñ or Ö to turn the display on.
To check the number of new calls
When new calls have been received, the CALLER ID indicator flashes
slowly on the base unit. The handset and base unit displays show the
number of new calls.
Ex. You have received 10 new calls.
While the handset is on the base unit:
Handset display
Base unit display
SUN 12:00AM
10 new calls
0 message
10 new calls
GF H
=Directory
•If “No items stored” is displayed, the Caller List is empty.
10 new calls
•Caller information cannot be displayed in the following cases:
•—If the caller dialed from an area which does not provide a Caller ID service, the
display will show “Out of area”.
•—If the caller has requested not to display his/her information, the display will
show “Private caller”.
•If your unit is connected to a PBX which does not support Caller ID services, you
cannot access those services.
•The name display service may not be available in some areas. For further
information, please contact your telephone company.
To Next Page
Loading...
