Panasonic KX-TG2721E - Getting Started: Setup and Battery; Setting Up Connections; Battery Installation and Charging

Setting up
Connections
R Use only the supplied Panasonic AC
adaptor PNLV226E.
R When mounting the unit on a wall, see
page 40.
n Base unit
Hook
“Click”
Press plug firmly.
To telephone line
(DSL/ADSL filter*)
Use only the supplied
telephone line cord.
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
Correct Incorrect
To power outlet
n Charger
To power outlet
Hooks
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
Rechargeable Ni-MH ONLY
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
Confirm “Charging” is displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
11
Getting Started
TG2711_21E(en)_0725_ver022.pdf 11TG2711_21E(en)_0725_ver022.pdf 11 2012/07/25 16:04:122012/07/25 16:04:12