This is normal and the handset can be used
once
stops flashing.
Registering the DECT repeater
(KX-A405) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1 Base unit:
Proceed with the operation for your
model.
n KX-TG2711 series: page 3
Press and hold for M
N about 5
seconds. (No registration tone)
n KX-TG2721 series: page 3
Press and hold M
N for about 5
seconds, until the registration tone
sounds.
R The next step must be completed
within 90 seconds.
2 DECT repeater:
Connect the AC adaptor, then wait until
the indicator and indicator light
green.
3 Base unit:
To exit the registration mode, press M
N.
R The registration tone stops.
(KX-TG2721 series: page 3)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
23
Programming
To Next Page
Loading...
