To Next PageTo Next PageWhat to do if I cannot hear a dial tone on my Panasonic Telephone?
If you cannot hear a dial tone on your Panasonic telephone, the base unit’s AC adaptor or telephone line cord might not be connected properly. Check the connections. You can also disconnect the base unit from the telephone line and connect the line to a known working telephone to identify if the problem is in the unit or in the telephone line.
How to fix a Panasonic KX-TG4134M handset that does not ring?
If your Panasonic telephone handset is not ringing, the ringer volume may be turned off, so adjust the ringer volume. Another possibility is that silent mode is turned on, so turn it off.
How to fix a Panasonic KX-TG4134M base unit that does not ring?
If your Panasonic telephone base unit is not ringing, the ringer volume is likely turned off. Adjust the ringer volume to resolve this.
How to fix my Panasonic Telephone if I cannot make a call?
If you cannot make a call on your Panasonic telephone, the dialing mode may be set incorrectly, so change the setting. Also, the handset may be too far from the base unit, so move closer and try again.
What to do if time on Panasonic KX-TG4134M has shifted?
If the time on your Panasonic telephone has shifted, it could be due to incorrect time information from incoming Caller ID changing the time. Set the time adjustment to “Manual” (off).
Why is caller information not displayed on my Panasonic KX-TG4134M Telephone?
There are several reasons why caller information may not be displayed on your Panasonic telephone. First, you must subscribe to Caller ID service. If your unit is connected to additional telephone equipment, plug the unit directly into the wall jack. If you use a DSL/ADSL service, connect a DSL/ADSL filter between the base unit and the telephone line jack. The name display service may not be available in some areas. Also, other telephone equipment may be interfering with this unit, so disconnect the other equipment and try again.
What to do if liquid entered my Panasonic KX-TG4134M?
If liquid or moisture has entered your Panasonic telephone handset or base unit, disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.
Why is my Panasonic KX-TG4134M displaying _?
If your Panasonic telephone is displaying '_', it could be because the handset is too far from the base unit, so move closer. Another reason could be that the base unit’s AC adaptor is not properly connected, so reconnect it. Also, ensure the handset is registered to the base unit.
How to fix noise and sound cutting in and out on Panasonic KX-TG4134M Telephone?
If you're experiencing noise or sound cutting in and out on your Panasonic telephone, it could be due to using the handset or base unit in an area with high electrical interference. Try re-positioning the base unit and using the handset away from sources of interference. Also, move closer to the base unit. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack.
Why I cannot register a handset to Panasonic Telephone base unit?
If you cannot register a handset to your Panasonic telephone base unit, it may be because the maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit to resolve this.
General| Number of Handsets | 4 |
|---|---|
| Caller ID | Yes |
| Talk Time | 13 hours |
| DECT Technology | Yes |
| Intercom | Yes |
| Call Block | Yes |
| Frequency | 1.9 GHz |
| Technology | DECT 6.0 |
| Answering System | Yes |
| Speakerphone | Yes |
| Call Waiting | Yes |
| Display | LCD |
| Range | Up to 1000 feet |
| Answering Machine | Yes |
| Power Source | AC Adapter |
| Type | Cordless Phone |
| Phonebook Capacity | 50 |
Covers crucial safety warnings, operating safeguards, and medical precautions for product use.
Details battery handling, safety instructions, and tips for optimal performance.
Step-by-step guide for connecting the base unit, charger, and installing batteries.
Instructions for charging batteries and understanding battery level icons.
Covers setting date, time, display, and voice guidance languages.
Customizing answering system settings like ring count and recording time.
How to view caller information, manage missed calls, and use phonebook name display.
Turning the system on/off, call screening, and setting greeting messages.
Recording, playing back, and erasing voice messages via handset or base unit.
How to remotely control the answering system using a phone.
Detailed guide to identifying and resolving common error messages and operational problems.
