Useful InformationAnswering SystemTelephone System
15
Programmable Settings
Preparation
Line Mode
The line mode is preset to “B” and generally should not be adjusted. If “
”
is
not displayed on the handset properly, the line mode selection is incorrect. Set line
mode to
“A”
.
Auto Talk
The Auto Talk feature allows you to answer calls by simply lifting the handset off the
base unit. You do not need to press [C] or [s]. The factory preset is OFF.
• In order to view caller information after you lift the handset to answer a call, leave
the Auto Talk feature turned off.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Scroll to “Set line mode” by pressing [d]
or [B], then press the soft key ( ).
5 Select “A” or “B” by pressing [d] or [B].
6 Press the soft key ( ), then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Auto talk” by pressing [d] or
[B], then press the soft key ( ).
4 Select “On” or “Off” by pressing [d] or [B].
5 Press the soft key ( ), then press [OFF].
Handset
IN USE
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set line mode
Set line mode
:B
SAVE
Handset
SELECT
Initial setting
SELECT
Auto talk
Auto talk
:Off
SAVE
TG5050CE.fm.fm Page 15 Thursday, June 24, 2004 3:55 PM
To Next Page
Loading...
