Useful Information
Advanced Operation
Preparation
29
Phone Book
Telephone System
Selecting characters to enter names
Enter names using the dialing buttons. Press each button until the desired
character is displayed.
• Pressing each button selects a character in the order shown below.
For example, to enter “Tom”:
1. Press [8] four times.
2. Press [6] three times, then press the soft key
()
to move the cursor.
3. Press [6] once.
If you make a mistake while entering a name or number
1. Press the soft key
()
or
()
to move the cursor to the incorrect
character.
2. Press the soft key
()
to delete the character.
• Each time you press the soft key
()
, a character is erased.
• To erase all characters, press and hold the soft key
()
.
3. Enter the correct character.
Keys Characters Keys Characters
[1]
#& ’ ( ); ,–. /1
[6]
mn oMNO6
[2]
abcABC2
[7]
pqr sPQRS7
[3]
de fDEF3
[8]
tuvTUV8
[4]
ghiGHI4
[9]
wxyzWXYZ9
[5]
jklJKL5
[0]
0Space
Moves the cursor to the left.
Moves the cursor to the right. (To enter another character using the same
number key, move the cursor to the next space.)
f
g
|
T
To
|
g
To
|
m
f g
CLEAR
CLEAR
CLEAR
TG5050CE.fm.fm Page 29 Thursday, June 24, 2004 3:55 PM
To Next Page
Loading...
