36
Special Features
Handset Locator
You can locate the handset or page the handset user from the base unit with beep
tones.
Muting Your Conversation
During a call, you can mute your phone so the other party cannot hear you. When
muting your conversation, you can hear the other party.
Press the soft key ( ).
• “Mute” will be displayed for a few seconds and “
” will flash.
• To release mute, press the soft key
() again.
• If you press [C] or [s] to switch between the receiver and speaker, mute will be
released.
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press [*] (TONE) before entering access numbers which require tone
dialing.
• The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the dialing
mode will return to pulse.
1 Press [LOCATOR] to page the handset.
• The IN USE indicator on the base unit and the Ringer/Message Alert
indicator on the handset flash rapidly.
• The paged handset will ring for 1 minute and display “Call from Base”.
2 To stop paging,
Base unit:
Press [LOCATOR].
OR
Handset:
Press [OFF].
• You can also stop paging by pressing any button except [d] or [B].
Base Unit
Handset
MUTE
MUTE
MUTE
Handset
TG5050CE.fm.fm Page 36 Thursday, June 24, 2004 3:55 PM
To Next Page
Loading...
