Answering System
Preparation
47
Telephone System Useful Information
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing [0]
to [9], and [#] instead of using the soft keys.
During programming:
When “
” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
Menu item Command Selection items Page
Ringer volume [1] [1] [0] : Off [1] : Low [2] : Medium
[3] : High
p. 16
Ringer tone [1] [2] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
p. 17
Voice enhancer [5] [1] : On [0] : Off p. 21
LCD contrast [0] [1] [1]–[6] : Level 1–6 p. 18
Key tone [0] [2] [1] : On [0] : Off p. 42
Auto talk [0] [3] [1] : On [0] : Off p. 15
Set dial mode [0] [5] [1] [1] : Pulse [2] : Tone p. 14
Set flash time [0] [5] [2] [1] : 700 ms [2] : 600 ms
[3] : 400 ms [4] : 300 ms
[5] : 250 ms [6] : 110 ms
[7] : 100 ms [8] : 90 ms
p. 41
Set line mode [0] [5] [3] [1] : A [2] : B p. 15
Call Waiting options [0] [5] [4] [1] : On [0] : Off p. 38
Store VM access# [0] [7] [1] Go to Step 5 on page 33. –
VM tone detect [0] [7] [2] [1] : On [0] : Off p. 34
Change language [0] [8] [1] : English [2] : French p. 14
Message alert [0] [#] [1] : On [0] : Off p. 18
Handset
SAVE
TG5050CE.fm.fm Page 47 Thursday, June 24, 2004 3:55 PM
To Next Page
Loading...
