Panasonic KX-TG5621S - Menu and Direct Command Programming; Key Feature and Ring Settings

Programming
30 For assistance, please visit http://www.panasonic.com/phonehelp
Programming using the direct commands
1 {MENU}
2 Enter the desired feature code.
3 Enter the desired setting code.
L This step may vary depending on the
feature being programmed.
4 {Save} i {OFF}
Note:
L In the following table:
– < > shows the default setting.
– If “System setting” column is checked,
you do not need to program the same
item using another handset (KX-
TG5622/KX-TG5623).
L If you make a mistake or enter the wrong
code, press {OFF}, then start again by
pressing {MENU}.
Feature Feature
code
Setting code System
setting
Auto talk
*1
{0}{3}{1}: On {0}: <Off>–
Caller ID edit
(Caller ID number auto edit)
{0}{4}{1}: <On> {0}: Off
(page 27)
–
Change language
(Display language)
{0}{8}{1}: <English>
{2}: Español (page 17)
–
Copy phonebook (1 item)
*2
{#}{1} (page 24) –
Copy phonebook (all items)
*2
{#}{2} (page 24) –
Key tone
*3
{0}{2}{1}: <On> {0}: Off –
LCD contrast
(Display contrast)
{0}{1}{1}–{6}: Level 1–6 <3> –
Message alert {0}{#} {1}: On {0}: <Off>–
Registration {0}{0} (page 35) –
Ring color
(Ringer indicator color)
{1}{4}{1}: <Color1>=Amber
{2}: Color2=Green
{3}: Color3=Red
{4}: Multicolor
–
Ringer tone
*4
{1}{2}{1}–{3}: Tone <1>–3
{4}–{7}: Melody 1–4
–
Ringer volume {1}{1}{1}: Low {2}: Medium
{3}: <High> {0}: Off
–
TG562X.book Page 30 Friday, February 10, 2006 1:41 PM