To Next PageTo Next PageWhat to do if the Panasonic Cordless Telephone unit does not work?
If your Panasonic Cordless Telephone unit isn't working, make sure the batteries are installed correctly and fully charged. Check the connections and try unplugging the base unit’s AC adapter to reset it, then reconnect it. Also, ensure the handset has been registered to the base unit.
Why has the time on my Panasonic Cordless Telephone shifted?
If the time on the unit has shifted, incorrect time information from incoming Caller ID may be changing the time. Set the time adjustment to “Manual” (off).
Why can't I have a conversation using the headset with my Panasonic Cordless Telephone?
To use a headset, confirm that the Bluetooth wireless headset supports the HeadSet Profile (HSP) specification. Your Bluetooth headset may not be paired; pair it. Turn your headset off, then turn it on and try again. If your headset is already connected to another Bluetooth device, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line).
What to do if my Panasonic KX-TG744SK Cordless Telephone does not ring?
If your Panasonic Cordless Telephone handset or base unit isn't ringing, make sure the ringer volume for landline or cellular line is not turned off by adjusting the ringer volume. Check if silent mode is turned on and turn it off. Also, ensure the ringer volume isn't turned off by pressing and holding 0; press and hold 0 again to turn it on. If you are using a cellular line, ensure that the unit which is selected to ring for cellular calls is correctly set.
Why does my Panasonic Cordless Telephone handset beep and/or flash?
If your Panasonic Cordless Telephone handset is beeping and/or flashing, the battery charge is likely low. Fully charge the batteries.
Why is caller information not displayed on my Panasonic KX-TG744SK Cordless Telephone?
If caller information isn't displayed on your Panasonic Cordless Telephone, ensure that you subscribe to Caller ID service. If you have additional telephone equipment connected, plug the unit directly into the wall jack. If you use a DSL/ADSL service, connect a DSL/ADSL filter between the base unit and the telephone line jack. Also, other telephone equipment may be interfering with this unit, so disconnect the other equipment and try again.
Why does my Panasonic Cordless Telephone have noise and sound cutting in and out?
If you are experiencing noise or sound cutting in and out on your Panasonic Cordless Telephone, it could be due to electrical interference. Try repositioning the base unit and using the handset away from sources of interference. Also, move closer to the base unit. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack.
What to do if my Panasonic KX-TG744SK unit does not work?
If your unit isn't working, ensure the batteries are correctly installed. Fully charge the batteries. Check all connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect and try again. Also, verify that the handset has been registered to the base unit; if not, register the handset.
Why I cannot pair a cellular phone to the Panasonic KX-TG744SK base unit?
You may not be able to pair your cellular phone to the base unit depending on its compatibility. Confirm that your cellular phone supports the hands-free profile (HFP) specification. Also, make sure the Bluetooth feature of your cellular phone is turned on. Try turning off and on your cellular phone. Also, confirm that you entered the correct PIN.
What to do if I cannot connect a cellular phone to the Panasonic KX-TG744SK base unit?
If you're having trouble connecting your cellular phone to the base unit, make sure your cellular phone is turned on and is within the base unit range. Try turning your cellular phone on. If the auto connection feature is on, there may be a delay due to the state of the wireless environment or electrical interference; you can try connecting to the base unit manually. You can also try pairing the cellular phone again or disconnecting and reconnecting the device to the base unit. It is recommended to remove the registration of the phone on both your cellular phone and on the Panasonic DECT phone.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG744SK |
| Type | Cordless Telephone |
| Frequency | 1.9 GHz |
| DECT Technology | Yes |
| Number of Handsets | 4 |
| Expandable Handsets | Yes |
| Speakerphone | Yes |
| Caller ID | Yes |
| Call Waiting | Yes |
| Display | LCD |
| Answering System | Yes |
| Digital Answering System Recording Time | 18 minutes |
| Battery Type | Ni-MH |
| Talk Time | Up to 10 hours |
| Standby Time | 5 days |
| Conference Call | Yes |
| Intercom | Yes |
