Programming
23
For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 23)
– using the direct commands (page 25)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V}, {^}, {>}, or {<} to select the desired main menu. i {SELECT}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 25 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
View Caller ID
W
––30
Phonebook
C
––19
V.M. access
#
––34
Ringer settings
(
Ringer volume Line1 –
Line2
Ringer tone Line1 –
Line2
Interrupt tone – 18,
35
Night mode Start/End 28
On/Off 28
TG9321(e).book Page 23 Friday, May 28, 2010 4:34 PM
To Next Page
Loading...
