– 6 –
Quick troubleshooting
Lift up the handset from the base unit or
charger.
Press {C} (TALK) at the handset, then
check if the display shows “Talk”.
Check if the
telephone cord is
properly connected
to both the base
unit and telephone
line jack on the
wall.
Try to connect your
telephone into a
different line.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone Dial tone is
heard.
2 No dial tone is heard from handset.
Try remedy for
1 on previous
page.
See if “Check tel line” is shown on the handset display.
Your telephone
may need service
when only back
speaker provides
a dial tone.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
“No link to
base. Reconnect
AC adaptor.”
is displayed.
“Talk” is
displayed.
Displayed Not displayed
Still displayed
Still displayed
{C}
{s}
5
Talk
K
Mute Ph.book
L
5
No link to base.
Reconnect AC
adaptor.
TG934x_QG(e).fm Page 6 Wednesday, December 5, 2007 10:12 AM
To Next Page
Loading...
