– 7 –
Registering a handset to a base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, register the handset.
{MENU} i {#}{1}{3}{0}
Press and hold {LOCATOR} for 4
seconds until the registration tone
sounds.
LThe next step should be completed
within 90 seconds.
LWhile registering, “Base
registering” is displayed on all
registered handsets.
Press {OK}, then press {OFF} after a
long beep sounds.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
Handset
5
Press LOCATOR
on base for 4sec
Then press OK
L
{MENU}
Base unit
{LOCATOR}
Handset
5
Press LOCATOR
on base for 4sec
Then press OK
L
{OK}
TG934x_QG(e).fm Page 7 Wednesday, December 5, 2007 10:12 AM
To Next Page
Loading...
