– 2 –
Setting up
CHARGE FOR
ABOUT 7 HOURS
Handset
Charger
L USE ONLY Ni-MH batteries AAA (R03) size.
L
Do NOT use Alkaline/Manganese/Ni-Cd batteries.
L Confirm correct polarities (S, T).
(120 V AC,
60 Hz)
Confirm
“Charging” is
displayed.
L Use only the supplied
Panasonic AC adaptor
PQLV219.
Rechargeable Ni-MH ONLY
Using the unit as a
single-line telephone only
Connect the telephone line cord to LINE 1/2.
Base unit/Handset:
LTo use line 1 only: {MENU} (25) s {r}: “Line1”
s {SAVE} s {} (EXIT)/{OFF}
LTo erase the message “Check tel line 2”:
{MENU} (19)
To Next Page
Loading...
