– 6 –
Frequently asked questions
Question Cause/solution
Why is w flashing? LThe handset is too far from the base unit. Move closer.
LThe base unit’s AC adaptor is not properly connected. Reconnect AC adaptor
to the base unit.
LThe handset is not registered to the base unit. Register it.
1 Handset: {MENU} (13)
2 Base unit: Press and hold {LOCATOR} for about 5 seconds until the
registration tone sounds.
3 Handset: Press {OK}, then wait until a long beep sounds.
How can I increase the
handset volume level?
LPress the navigator key {^} repeatedly while talking.
Why is the conversation
noisy or cutting off?
LTry to relocate the base unit so that distance to the handset is minimized.
LIf the same problem occurs even if the handset is next to the base unit, call
Panasonic customer support at 1-800-211-PANA (1-800-211-7262).
Can I add another
accessory handset to my
base unit?
LYes, you can add up to 6 handsets (including the handset(s) sold with your own
base unit) to a single base unit.
LTo purchase accessory handset (KX-TGA939), please visit
http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or speech impaired users) can call
1-866-605-1277.
Can I keep the batteries
charging all the time?
LYou can leave the handset on the charger anytime. This will not harm the
batteries.
How can I answer a call
waiting call (2nd call)?
LPress {CALL WAIT} when you hear the call waiting tone.
For further registration information, visit http://www.panasonic.com/RegisterYourHandset
TG9471_QG(e).fm Page 6 Wednesday, June 22, 2011 2:26 PM
To Previous Page
Loading...
