Getting Started
For assistance, please visit http://www.panasonic.com/help
To connect to 2 single-line telephone
jacks
Example:
DSL/ADSL line is line 2
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
“Charge completed” is displayed.
Rechargeable Ni-MH ONLY
“GREEN” plug
“Transparent” plug
2-wire cord
4-wire cord
To single-line telephone
acks (RJ11C)
Line 1
Line 2
“Click”
DSL/ADSL filter*
“Click”
Charging
Confirm "
" is displayed.
To Next Page
Loading...
