EasyManua.ls Logo

Panasonic KX-TG9582 - Making;Answering Calls Using the Base Unit; Making cellular calls; Making landline calls; Using the speakerphone

Panasonic KX-TG9582
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Making cellular calls
I
mportant:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the
corresponding CELL indicator lights up
(page 16).
1 Dial the phone number.
R To correct a digit, press MCLEARN.
2 Press the desired cellular line key (MCELL 1N
to MCELL 4N).
3 Lift the corded handset.
4 When you finish talking, place the corded
handset on the cradle.
Note:
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 29).
A Handset: MCELLN
*1
a MbN: Select the
desired cellular phone. a MSELECTN
*1 The call is taken when:
only 1 cellular phone is paired.
a specific line is set to make cellular calls
(page 21).
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M
N.
R D
uring a conversation with the corded handset,
you can switch to the speakerphone by pressing
M
N,
then place the corded handset on the
cradle.
Adjusting the receiver or speaker volume
P
ress MDN or MCN repeatedly while talking.
Making a cellular call using the redial list
T
he last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1 MREDIALN
2 MbN: Select the desired phone number.
3 Press the desired cellular line key (MCELL 1N
to MCELL 4N), then lift the corded handset.
Erasing a number in the redial list
1 MR
EDIALN
2 MbN: Select the desired phone number. a
MERASEN
3 MbN: Yes a MSELECTN
4 ME
XITN
Making landline calls
1 D
ial the phone number.
R To correct a digit, press MCLEARN.
2 Lift the corded handset.
R An available line is automatically selected
and either the LINE 1 indicator or LINE 2
indicator lights up. To change the line
selection mode, see page 18.
R You can also select the line manually by
pressing MLINE 1N or MLINE 2N before lifting
the corded handset.
3 When you finish talking, place the corded
handset on the cradle.
Note:
R You can also dial the phone number after lifting
the corded handset.
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 29).
A Handset: Press the corresponding line key
(ML1N or ML2N).
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M
N.
Using the speakerphone
1 D
uring a conversation with the corded
handset, press M
N
to turn on the
speakerphone.
R You can place the corded handset on the
cradle.
R Speak into the base unit microphone.
R Speak alternately with the other party.
2 When you finish talking, press M
N.
N
ote:
R To switch to the receiver, lift the corded handset.
Making a call using the redial list
T
he last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1 MREDIALN
2 MbN: Select the desired phone number.
3 Lift the corded handset.
For assistance, please visit http://shop.panasonic.com/support
27
Making/Answering Calls Using the Base Unit
TG95x_OI(en-en)_0722_ver110.pdf 27 2015/07/22 12:33:22

Table of Contents

Other manuals for Panasonic KX-TG9582

Related product manuals