Pause (for PBX/long distance service users)
A
pause is sometimes required when making calls
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed
(page 39).
Example: If you need to dial the line access
number “9” when making outside calls with a PBX:
1 9 a MPAUSEN
2 Dial the phone number.
3 Lift the corded handset.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Answering calls
1 L
ift the corded handset or press MZN when the
unit rings.
R You can also answer the cellular call by
pressing the corresponding cellular line key
(MCELL 1N to MCELL 4N).
R The called landline is automatically
selected. To change the line selection
mode, see page 18.
R You can also answer the landline call by
pressing MLINE 1N or MLINE 2N.
2 When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press MZN.
Temporary ringer off: You can turn the ringer off
temporarily by pressing M
N.
Adjusting the base unit ringer volume
P
ress MDN or MCN repeatedly to select the desired
volume while ringing.
Useful features during a call
Hold
1 Press MHOLDN during an outside call.
R If you are using the corded handset, you
can place it on the cradle.
R During hold, the caller will hear music. For
canceling music, see page 48.
2 T
o release hold on the cellular line:
Press the corresponding cellular line key
(MCELL 1N to MCELL 4N).
R A handset user can take the call: MCELLN
*1
a MbN: Select the corresponding cellular
phone. a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 21).
To release hold on the landline:
Press the corresponding landline key (MLINE
1N or MLINE 2N).
R A handset user can take the call by
pressing the corresponding landline key
(ML1N or ML2N).
Note:
R While the call is put on hold, the corresponding
line indicators flash.
R After holding for 10 minutes, the call is
disconnected.
Mute
1 P
ress MMUTEN during a call.
2 To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash for landline calls
MF
LASHN allows you to use the special features of
your host PBX such as transferring an extension
call, or accessing optional telephone services.
Note:
R To change the flash time, see page 48.
For call waiting or Call Waiting Caller
I
D service users
To use call waiting or Call Waiting Caller ID, you
must first subscribe with your service provider/
telephone company.
This feature allows you to receive calls while you
are already talking on the phone. If you receive a
call while on the phone, you will hear a call waiting
tone.
28
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
To Next Page
Loading...
