For assistance, please visit http://www.panasonic.com/help 11
2 {V}/{^}: Select the desired setting. i {SAVE} i {OFF}
Selecting “Greeting only”
The unit announces a greeting message to callers but not record
messages.
{MENU} i {#}{3}{0}{5} i {V}/{^}: “Greeting only” i
{SAVE} i {OFF}
Note:
LWhen you select “Greeting only”:
If you do not record your own message, the unit will play the pre-
recorded greeting-only message asking callers to call again later.
Calling back (Caller ID subscribers only)
While caller information is displayed during playback, press {PAUSE}.
i {V}/{^}: “Call back” i {SELECT}
NEditing the number before calling back
Press {PAUSE} during playback. i {V}/{^}: “Edit & Call” i
{SELECT} i Press {EDIT} repeatedly until the phone number is
shown in the desired format. i {C}
Message alert (default: on)
You can select whether or not the message indicator on the handset
flashes slowly when new messages are recorded.
Important:
LIf you stored the voice mail access number (page 14), the message
indicator also flashes for newly recorded voice mail messages.
1 {MENU} i {#}{3}{4}{0}
2 {V}/{^}: Select the desired setting. i {SAVE} i {OFF}
Note:
LWhile message alert is on, battery operating time is shortened
(page 4).
TGA401(e).fm Page 11 Tuesday, December 22, 2009 12:10 PM
To Next Page
Loading...
