Installation
Display
language
1
[MENU][!][1J[][Q]
2
[~]:Select
the desired
setting.~
[SAVE]~
[OFF]
For
your
safety
To prevent severe injury and loss
of
life/property, read this section carefully before
using the product to ensure proper and safe operation
of
your product.
WARNING
Power connection ·
• Completely
insert the
AC adaptor/power plug into the power outlet. Failure to do
so may cause electric shock and/or excessive heat resulting in a fire.
•
Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling
it
from the power outlet, then wiping with a dry cloth. Accumulated dust may cause
an insulation defect from moisture, etc. resulting in a fire.
•
Unplug the product from power outlets
if
it emits smoke, an abnormal smell,
or
makes an unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact the Panasonic
Call
Center
at 1-800-211-
PANA (1-800-211-7262).
Installation
•
To prevent the risk
of
fire
or
electrical shock, do not expose the product to rain
or
any type
of
moisture.
• Do not place or use this product near automatically controlled devices such as
automatic doors and fire alarms. Radio waves emitted from this product may
cause such devices to malfunction resulting in an accident.
CAUTION
Installation
and location
•
The
AC
adaptor is used as the main disconnect device. Ensure that the
AC
outlet is installed near the product and is easily accessible.
Battery
•
We recommend using the supplied batteries
or
additional/replacement batteries
noted on page
2
for replacement battery information.
USE
ONLY rechargeable
Ni-MH batteries
AAA
(R03)
size.
•
Do not mix
old
and new batteries.
4
For assistance,
please
visit
http://www.panasonic.com/help