Answering calls
Using the handset
W
hen a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and then press M
N
or
M
N
when the unit rings.
2 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 32).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
N.
Using the base unit
Available for:
K
X-TGE440 series (page 3)
When a call is being received, the SP-PHONE
i
ndicator flashes rapidly.
1 Press MZN when the unit rings.
2 Speak into the microphone.
3 When you finish talking, press MZN.
Adjusting the ringer volume
Handset
P
ress MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press MkN repeatedly.
Base unit
P
ress MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold MkN
until the unit beeps.
Useful features during a
c
all
Hold
Handset
1 P
ress MMENUN during an outside call.
2 MbN: “Hold” a MSELECTN
3 To release hold, press M
N.
R A
nother handset user can take the call
by pressing M
N.
R T
he base unit user can take the call by
pressing MZN. (KX-TGE440 series:
page 3)
Base unit
*
1
*1 KX-TGE440 series: page 3
1 Press MHOLDN during an outside call.
2 To release hold, press MZN.
R A handset user can take the call by
pressing M
N.
N
ote for handset and base unit:
R While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
Handset
1 P
ress MMUTEN during a call.
2 To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Base unit
*
1
*1 KX-TGE440 series: page 3
1 Press MMUTEN during a call.
R The SP-PHONE indicator flashes.
2 To return to the call, press MMUTEN.
For assistance, please visit http://shop.panasonic.com/support
17
Making/Answering Calls
To Next Page
Loading...
