Panasonic KX-TGF370 Series - Page 32

6 MS
AVEN a MOFFN
n When a cellular phone is not paired:
1 MCN CID
2 MbN: Select the desired entry to be
blocked.
R To edit the number: MMENUN a
MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
10-digit format. a MSAVEN a
“Call block” a MSELECTN a
Go to step 4.
3 MCALL BLOCKN
4 MbN: “Yes” a MSELECTN
5 Edit the phone number if necessary
(24 digits max.).
6 MSAVEN a MOFFN
Base unit
1 MC
IDN
2 MbN: Select the entry to be blocked.
R To edit the number: Press MEDITN
repeatedly until the phone number is
shown in the 10-digit format.
3 MSAVEN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MEXITN
Adding call blocked numbers
m
anually
Handset
1 MC
ALL BLOCKN
2 MbN: “Block a single number” a
MSELECTN
3 MMENUN a MbN: “Add” a MSELECTN
4 Enter the phone number (24 digits max.).
5 MSAVEN a MOFFN
Base unit
1 MM
ENUN#217
2 MbN: “Block a single #” a
MSELECTN a MADDN
3 Enter the phone number (24 digits max.).
4 MSAVEN a MEXITN
Storing a range of number
Handset
1 MC
ALL BLOCKN
2 MbN: “Block range of numbers” a
MSELECTN
3 MMENUN a MbN: “Add” a MSELECTN
4 Enter the desired number (2-8 digits).
5 MSAVEN a MOFFN
Base unit
1 MM
ENUN#217
2 MbN: “Block range of #” a
MSELECTN
3 MADDN
4 Enter the desired number (2-8 digits).
5 MSAVEN a MEXITN
Blocking incoming calls that
h
ave no phone number
You can block calls when no phone number is
provided, such as private callers or out of area
calls.
Handset
1 MC
ALL BLOCKN
2 MbN: “Block unknown CID” a
MSELECTN
3 MbN: Select the desired setting. a
MSAVEN a MOFFN
Base unit
1 MM
ENUN #240
32
For assistance, visit www.panasonic.ca/english/support
Call Block
TG175CSK(en)_0324_ver011.pdf 32 2016/03/24 9:06:19