Base unit display items
Item Meaning
The landline is in use.
R W
hen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
A cellular line is in use.
*
1
R When flashing:
The cellular call is put on hold.
R When flashing rapidly:
A cellular call is being received.
Ringer volume is off.
*
2
(page 39,
41)
Silent mode is on. (page 45)
Call sharing mode is off.
(
page 43)
“G
reeting only” is selected.
Caller messages are not recorded.
(page 63)
– A cellular call is in progress on
t
hat line.
– The cellular line is selected for
the setting.
Power backup mode is on.
(
page 10)
Blocked call (page 28)
A Bluetooth headset is connected
t
o the base unit. It is ready for use.
A Bluetooth headset is in use.
In use
Answering system is being used by
t
he handset.
Cell1 in
u
se
Someone is using the
c
orresponding line.
Cell2 in
u
se
Cell1
&
Cell2
in use
Line in
u
se
*1 Corresponding lines (C1, C2: cellular line) are
i
ndicated next to the item.
*2 Corresponding lines (C1, C2: cellular line, L:
l
andline) are indicated next to the item. If all
lines are turned off, no line is indicated.
CELL indicators on the base unit
T
he CELL indicators show each cellular line status.
Status Meaning
On A cellular phone is connected.
R
eady to make/receive cellular calls.
Flashing – The cellular line is in use.
–
Phonebook entries are being
copied from a cellular phone.
(page 52)
– The base unit is searching for the
paired cellular phone.
– The base unit is pairing a cellular
phone.
– A cellular call is put on hold.
Flashing
r
apidly
A cellular call is being received.
Light off – A cellular phone is not paired to
t
he base unit.
– A cellular phone is not connected
to the base unit. (page 18)
Language settings
Display language
Y
ou can select either “English” or “Español”
as the display language. The default setting is
“English”.
Handset / Base unit
1 MM
ENUN#110
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Voice guidance language
Y
ou can select either “English” or “Español”
as the voice guidance language of the answering
system. The default setting is “English”.
You can configure this setting using either the
base unit or one of the handsets.
14
For assistance, please visit http://shop.panasonic.com/support
Getting Started
To Next Page
Loading...
