1 9 a MDN (Pause)
2 Dial the phone number. a M
N
Note:
R A 3 second pause is inserted each time MDN
(Pause) is pressed.
Answering calls
1 Lift the handset and press M
N or MZN when
the unit rings.
R To answer a mobile call, you can also press
MMOBILEN.
2 When you finish talking, press MOFFN or place
the handset on the charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by lifting
the handset (page 42).
Temporary ringer off: You can turn the ringer off
temporarily by pressing M
N.
Adjusting the handset ringer volume
Press MDN or MCN repeatedly to select the desired
volume while ringing.
Note:
R The ringer volume you set is kept for each line
(landline and mobile lines).
Useful features during a call
Hold
1 Press MMENUN during an outside call.
2 MbN: “Hold” a MSELECTN
3 To release hold on the mobile line:
Press MMOBILEN.
*1
R Another handset user can take the call by
pressing MMOBILEN.
*1
*1 If you press MMOBILEN and the
selection list is displayed, select the
desired mobile line and press
MSELECTN.
R The base unit user can take the call by
pressing MMOBILE 1N or MMOBILE 2N. a
Lift the corded handset.
To release hold on the landline:
Press M
N.
R Another handset user can take the call by
pressing M
N.
R The base unit user can take the call by
lifting the corded handset.
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
1 Press MMUTEN during a call.
2 To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Recall for landline calls
MRECALLN allows you to use the special features
of your host PBX such as transferring an extension
call, or accessing optional telephone services.
Note:
R To change the recall time, see page 42.
Handset noise reduction
This feature allows you to hear the voice of the
person you are talking to more clearly, by reducing
the surrounding noise coming from the other
party’s telephone.
1 Press MMENUN while talking.
2 MbN: “Noise reduction on” or “Noise
reduction off” a MSELECTN
Note:
R The setting you made is kept for each line
(landline and mobile lines).
The default settings are as follows:
– for landline: “Noise reduction off”
– for mobile lines: “Noise reduction on”
R Depending on the environment where this
handset is being used, this feature may not be
effective.
R This feature is not available while using the
speakerphone.
21
Making/Answering Calls Using the Handset
TGF38xAZ(en)_0319_ver001.pdf 21 2015/03/19 21:57:15
To Next Page
Loading...
Need help?
General
