Requirements
R An Android device (Android 2.1 or later)
Text message (SMS) alert
For iPhone and BlackBerry
®
users
This feature alerts you on your DECT phone when
your paired mobile phone receives SMS
messages. The Link to Cell app is not required for
iPhone and BlackBerry users.
Important:
R Your mobile phone must support MAP
(Message Access Profile) specification.
R For further information, refer to the instructions
on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings are
required.
– iPhone and BlackBerry Phone: Bluetooth
must be turned on.
– Handset or base unit: “Alert On/Off”
must be turned on (page 55).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
Alert settings for your DECT
phone
If your mobile phone is paired to the base unit and
receives notifications, the handset and/or base unit
can alert you:
– by briefly displaying a message
– by sounding alert tones
Important:
R For Android users: Use the Link to Cell app to
enable the desired alerts (page 54).
Turning alert on/off
Once this feature is turned on, it will alert you on
the handset and base unit when your mobile
phone receives notifications.
– “On” (default): The handset and/or base unit
alert you.
– “Off”: The handset and/or base unit do not
alert you.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1 For MOBILE 1: MMENUN#6101
For MOBILE 2: MMENUN#6102
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Setting the voice alert
You can turn on/off the voice alert.
– “On” (default): The handset and/or base unit
notify you by voice announcement.
– “Off”: Voice announcement is not available as
alert.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1 For MOBILE 1: MMENUN#6031
For MOBILE 2: MMENUN#6032
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Selecting the alert tone
Handset
1 For MOBILE 1: MMENUN#6041
For MOBILE 2: MMENUN#6042
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base unit,
you can have a hands-free conversation wirelessly
for landline calls.
Important:
R Your Bluetooth wireless headset must support
the HeadSet Profile (HSP) specification.
R 1 headset can be paired to the base unit.
55
Using Bluetooth® Devices
TGF38xAZ(en)_0319_ver001.pdf 55 2015/03/19 21:57:17
To Next Page
Loading...
Need help?
General
