Making cellular calls
Important:
R The unit cannot be used to talk on 2 cellular
lines at the same time.
R Only 1 Bluetooth device can be used with
the unit at a time
*1
.
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 17).
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
1 Dial the phone number.
R To correct a digit, press MCLEARN.
2 Press MCELL 1N or MCELL 2N.
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press
MSP-PHONEN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press MINTERCOMN on the base unit.
a Select the desired handset number
on the base unit. a Press M
N on the
handset. a Press MSP-PHONEN on the
base unit.
– If the handset is on the base unit, simply
lift it.
– With the call sharing mode on
(page 58), press MCELLN
*1
on the
handset. a M
bN: Select the desired
cellular phone. a MSELECTN a Press
MSP-PHONEN on the base unit.
*1 The call is taken when:
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 23).
Adjusting the speaker volume
Press M
DN or MCN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and cellular lines).
Making a call using the redial list
The last 10 phone numbers dialed are stored
in the redial list (48 digits max. each).
1 MREDIALN
2 M
bN: Select the desired entry.
3 Press MCELL 1N or MCELL 2N.
Erasing a number in the redial list
1 MREDIALN
2 M
bN: Select the desired entry. a
MERASEN
3 M
bN: “Yes” a MSELECTN a MEXITN
Making landline calls
1 Dial the phone number.
R To correct a digit, press MCLEARN.
2 MSP-PHONEN
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press
MSP-PHONEN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
MSP-PHONEN on the base unit with the
call sharing mode on (page 58).
– If the handset is on the base unit, simply
lift it.
Making a call using the redial list
The last 10 phone numbers dialed are stored
in the redial list (48 digits max. each).
1 MREDIALN
2 M
bN: Select the desired entry.
3 MSP-PHONEN
For assistance, please visit http://shop.panasonic.com/support
31
Making/Answering Calls Using the Base Unit
To Next Page
Loading...
