Panasonic KX-TGFA97 - Operating a Bluetooth headset using a landline; Call sharing between your headset and the handset; Switching between the base unit and your headset

Making landline calls with your
headset
Base unit
1 Press your headset’s button referring to
your headset’s operating instructions.
2 Dial the phone number using the base
unit after hearing the dial tone on your
headset.
3 When you finish talking, press your
headset’s button referring to your
headset’s operating instructions.
Note:
R This function may not operate properly
depending on specification of the headset.
Answering landline calls with your
headset
To answer a landline call, press your
headset’s button.
When you finish talking, press your headset’s
button.
Note:
R If you cannot hang up the call using your
headset, press MSP-PHONEN on the base
unit 2 times.
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 58).
n While the handset is on a landline call:
To join the conversation with your headset,
press your headset’s button.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Note:
R This function may not operate properly
depending on specification of the headset.
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone.
– during an intercom call between the base
unit and handset.
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Press M
N on the base unit.
n To switch to the base unit:
Press MSP-PHONEN on the base unit.
Adjusting your headset receiver
volume
Base unit
Press M
DN or MCN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
volume may not be adjustable.
For assistance, please visit http://shop.panasonic.com/support
75
Using Bluetooth® Devices