To Next PageTo Next PageWhat to do if I can make and answer cellular calls but cannot hear a sound on my Panasonic KX-TGH264 Telephone?
If you can make and answer cellular calls but cannot hear a sound: * The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. * Disconnect and reconnect the base unit AC adaptor and try again.
Why can't I make or answer cellular calls with my Panasonic KX-TGH264 handset?
If you are unable to make or answer cellular calls with the handset, consider the following: * Depending on the cellular phone’s compatibility, you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit. * Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). * The cellular phone is being used separately from your system.
What to do if I cannot make local calls with the Panasonic KX-TGH264 handset using a cellular line?
If you cannot make local calls with the handset using a cellular line, you may need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls.
What to do if fully charged batteries in my Panasonic KX-TGH264 still flash or show shorter operating time?
If you've fully charged the batteries but they still flash, display , or have a shorter operating time, try these steps: * Clean the battery ends and the charge contacts with a dry cloth and charge again. * It might be time to replace the batteries.
Why can't I register a handset to a base unit on my Panasonic Telephone?
If you cannot register a handset to a base unit, it's possible that the maximum number of handsets (6) is already registered. Cancel unused handset registrations from the base unit.
What to do if my Panasonic Telephone unit does not work?
If your unit isn't working, there are several things you can check: * Ensure the batteries are correctly installed. * Fully charge the batteries. * Verify all connections are secure. * Unplug the base unit’s AC adaptor to reset it, then reconnect and try again. * Make sure the handset is registered to the base unit.
Why can't I pair a cellular phone to my Panasonic KX-TGH264 Telephone base unit?
If you're having trouble pairing a cellular phone, here are a few things to check: * Confirm that your cellular phone supports the hands-free profile (HFP) specification. * Ensure the Bluetooth feature of your cellular phone is turned on. * The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. * Your cellular phone may already be connected to another Bluetooth device. Turn it off or disconnect it from your cellular phone. * Some cellular phones may require you to enter the Bluetooth PIN to pairing. Confirm that you entered the correct PIN.
What should I do if liquid entered my Panasonic KX-TGH264 handset/base unit?
If liquid has entered the handset/base unit: 1. Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset. 2. Leave the devices to dry for at least 3 days. 3. After they are completely dry, reconnect the AC adaptor and telephone line cord. 4. Insert the batteries and charge fully before use. If the unit still doesn't work properly, contact an authorized service center.
Why is caller information not announced on my Panasonic KX-TGH264 Telephone?
If caller information isn't being announced, here are some things to check: * The ringer volume for landline might be turned off. Adjust the ringer volume. * The ringer volume for cellular line might be turned off. Adjust the ringer volume. * When one handset is selected to ring for cellular calls, other units do not announce caller information. * The Talking Caller ID feature might be turned off. Turn it on. * The ring as cell mode is set to “On (without Talking CID)”. To change the mode, see page 17. * The number of rings for the answering system is set to “2 rings” or “Toll saver”. Select a different setting. * Your unit does not announce caller information while the other devices such as headset or handsets are engaged in a call.
Why is caller information displayed or announced late on my Panasonic KX-TGH264?
If caller information is displayed or announced late, it may be because: * Depending on your service provider/telephone company, the unit may display or announce the caller’s information at the 2nd ring or later. * Move closer to the base unit.
General| Type | Cordless Phone |
|---|---|
| Expandable up to | 6 Handsets |
| Answering System | Yes |
| Answering Machine | Yes |
| Caller ID | Yes |
| Call Waiting Caller ID | Yes |
| Speakerphone | Yes |
| DECT 6.0 Technology | Yes |
| Intercom | Yes |
| Ring Tones | 10 |
| Headset Jack | Yes |
| Battery Type | Ni-MH |
| Battery Life (Talk Time) | 13 Hours |
| Frequency | 1.9 GHz |
| Range | Up to 1000 feet |
| Key Finder Compatible | Yes |
| Noise Reduction | Yes |
| Power Back-Up Operation | Yes |
| Display | LCD |
| Backlit Display | Yes |
| Phonebook Capacity | 50 entries |
| Battery Life (Standby Time) | 120 hours |
| Weight (Handset) | 4.8 oz |
