EasyManua.ls Logo

Panasonic KX-TGP500B04 - Basic Operations - Making Calls; Making Calls via Handset; Using the Speakerphone (Handset); Making Calls via Base Unit (KX-TGP550)

Panasonic KX-TGP500B04
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
KX-TGP500B04/KX-TPA50B04
4.6. Circuit Operation (Base Unit)
General Description:
(DSP, Flash Memory) is a digital speech/signal processing system that implements all the functions of speech compression,
and memory management.
The DSP system is fully controlled by a host processor DSP. The host processor provides activation and control of all that
functions as follows.
4.6.1. DSP (Digital Speech/Signal Processing: IC504)
Caller ID demodulation
The DSP implements monitor that provide CID information from the Central Office.
Digital Switching
The voice signal from IP line is transmitted to the handset or the voice signal from the handset is transmitted to the IP line, etc.
They are determined by the signal path route operation of voice signal.
Block Interface Circuit
RF part, LED, Key scan, Ethernet interface.
VOIP (Voice over Internet Protocol)
The voice data encoding/decoding and RTP (Real-time Transport Protocol) packet conversion are performed at the VoIP part.

Table of Contents

Other manuals for Panasonic KX-TGP500B04

Related product manuals