50
KX-TGP500B04/KX-TPA50B04
9.3. Web User Interface
9.3.1. Web user interface Parameter List
The following tables show all the parameters of web user interface for Customer Service.
9.3.2. Access to Web user interface
1. It is necessary to open the web port of the unit beforehand. Set "Embedded web" to "On" using phone user interface
programming.
2. Open your web browser, and enter the unit’s IP address following "http://" consecutively into the address field.
3. For authentication, enter “User name” and “Password” for Customer Service, and click [OK].
4. The Web UI window is displayed. Then, you can perform the configuration as desired.
5. You can log out from the Web UI at any time by clicking [Web Port Close].
Tab Menu/Title
Status
Version Information
Network Status
VoIP Status
Maintenance
Test Mode Settings
Local Firmware Update
Reset to Defaults
Restart
ser name : customerserviceid
assword : cspass
To Next Page
Loading...
