Panasonic KX-TGP500B04 - How to Change MAC Address Label (Procedure after Replacing the Main P.C.board of Base Unit)

56
KX-TGP500B04/KX-TPA50B04
9.5. How to Change MAC Address Label
(Procedure after Replacing the Main P.C.Board of Base Unit)
When replacing the Main P.C.Board on the Base Unit, customer data shall be renewed before sticking the included MAC/Serial
label.
9.5.1. Replacing Main P.C.Board
Note:
(*1) : If you reuse defective P.C.Board for another repairing unit by repairing. Peel off the serial number and MAC address label
on original bottom cabinet and keep them with defective P.C.Board.
(*2) : If you do not reuse the defective P.C.Board by repairing, scrap the P.C.Board to prevent the leak of customer's information
in flash ROM.