30
KX-TGP500B04/KX-TPA50B04
8.1.8. Test Link Mode for Handset
Note:
(*1) LCD displays the Channel number.
(exception: default/ CH01 = 01ch.)
(*2) If can not proceed to the next step, refer to Registering a handset to the base unit in the Operating Instructions.
(*3) for factory use only.
(*4) Refer to Check Table for RF part (P.73).
(*5) Operation for regular base unit. Refer to CHART1 in the TEST RANGE Check (P.74).
To Next Page
Loading...
