PANASONIC IP CORDLESS SYSTEM
(KX-TGP600 AND KX-TPA60)
Handset
Locator
button
Status Indicator
Using MessageBank
®
• Dial 101 and follow the
prompts to customise your
settings or listen to your
messages.
The Message Indicator will ash
red if there are new messages.
Save a contact to the
Phonebook
Each handset has its own
phonebook which will need to
be set up for each phone.
• Use the soft key to select
Menu.
• Use navigation keys to scroll
to New Phonebook and use
soft key to select OK.
• Use the keypad ‘Enter Name’
of contact and use soft key to
select OK.
• Use the navigation keys to scroll
to the desired line entry and use
the soft key to select OK.
• Use the keypad to ‘Enter Phone
No’ and use soft key to select OK.
• When you have completed
all entries for a contact, use
the soft key to select SAVE.
Important – If you don’t select
SAVE before exiting the directory,
your changes will not be saved.
Basic Functions
A quick guide to the basics of your Panasonic IP DECT.
Place a call
• Use the keypad to enter the other party’s phone
number, and press Talk/Speaker Phone.
End a call
Whilst on an active call:
• Press Power/Cancel to end the call.
Hold a call
Whilst on an active call:
• Press Hold/Msg.
Place a call on
Handsfree mode
Whilst on an active call:
• Press Talk/Speaker Phone.
Adjust call/
ringer volume
Whilst on an active call/on Standby mode:
• Use navigation keys Up/Down to adjust
call volume.
Mute/unmute
a call
Whilst on an active call/Standby mode:
• Use soft key to select MUTE to enable/disable
the handset microphone.
Note: MUTE mode is active if the icon is ashing.
View and call
from outgoing
log
Whilst on Standby mode:
• Use soft key to select Outgoing Log.
• Use navigation keys to scroll to desired contact and
press Talk/Speaker Phone to place the call.
View and call
from incoming
log
Whilst on Standby mode:
• Use soft key to select Outgoing Log.
• Use same soft key to select Incoming Log.
• Use navigation keys to scroll to desired contact and
press Talk/Speaker Phone to place the call.
View and call
from missed
calls
Whilst on Standby mode:
• Use navigation keys to scroll to the left and select
Missed Call.
• Use navigation keys to scroll to desired contact and
press Talk/Speaker Phone to place the call.
Undo typing
• Press Xfer/Clr to undo typing.
Ringer/Charge
/Message Indicator
Headset Jack
Talk/Speaker Phone
Hold/Msg
Microphone
Soft Keys
Power/Cancel
Navigation
Keys
Receiver
Function
Xfer/Clr
(Transfer/Clear)
To Next Page
Need help?
General
Weight and Dimensions
