For assistance, please call: 1-800-211-PANA(7262)
11
Preparation
“
Dialing Mode
You can select the dialing mode by programming. If you have touch tone
service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”.
Your phone comes from the factory set to “Tone”.
Make sure that a call is not put on hold.
1
Press (PROGRAM).
2
Press (MUTE).
3
Press (3).
≥The current setting is displayed.
4
To select “Pulse”, press (2).
OR
To select “Tone”, press (1).
5
Press (PROGRAM).
≥A long beep sounds.
≥The unit will return to the standby mode.
To Next Page
Loading...
