For assistance, please call: 1-800-211-PANA(7262)
13
Preparation
LCD Contrast
You can select the LCD contrast level from 1 to 4 by programming. Your
phone comes from the factory set to 3.
Make sure that a call is not put on hold.
1
Press (PROGRAM).
2
Press (MUTE).
3
Press (7).
≥The current setting is displayed.
4
Press (1) to (4).
≥Each time you press a button, the level
will change on the display.
5
Press (PROGRAM).
≥A long beep sounds.
≥The unit will return to the standby mode.
Ringer Volume
You can select the ringer volume to HIGH, LOW or OFF. Your phone
comes from the factory set to HIGH.
“
To Next Page
Loading...
