Useful Information
Making/Answering Calls
Make sure to install the batteries.
1
Press the line button to select the telephone line.
2
Press (SP-PHONE/HEADSET) to make or answer a call.
≥The line indicator lights red and SP-PHONE/HEADSET indicator flashes.
≥If you misdial when making a call, press (SP-PHONE/HEADSET) twice and
dial again.
3
To hang up, press (SP-PHONE/HEADSET).
≥The indicator light goes out.
To adjust the headset receiver volume (4 levels):
While using the headset, press VOLUME (_) or (^).
≥Be sure that the (CONF) button is released.
≥During a conversation using the headset, you cannot switch the call to the
handset by lifting it off the cradle.
≥If you disconnect the optional headset during a conversation with the handset on
the cradle, the call will be switched to the speakerphone.
≥During a conversation using the speakerphone, you can switch the call to the
headset by connecting the headset.
To Next Page
Loading...
