Panasonic KX-TS880EX User Manual (English)

Questions and Answers:

A
Angela HuntAug 15, 2025
Why is caller information not displayed on my Panasonic Telephone?
- B
  Bruce RussellAug 15, 2025
  Several factors can cause caller information not to be displayed on your Panasonic Telephone. First, ensure you have subscribed to Caller ID service with your service provider or telephone company. Second, install or replace the batteries. Third, plug the unit directly into the wall jack. Fourth, it is recommended to connect a DSL/ADSL filter between the unit and the telephone line jack. Finally, disconnect any other devices and try again.
O
ovalentineAug 18, 2025
Why can't I store a name and phone number in my Panasonic Telephone?
- S
  Samuel GarciaAug 18, 2025
  If you're unable to store a name and phone number in your Panasonic Telephone's memory, make sure the batteries are installed and not low. Also, programming is not possible when the handset is off the cradle, when “ ” is displayed, or when “W” is displayed. Avoid pausing for over 60 seconds while storing, and do not enter a phone number more than 32 digits long. Finally, you cannot store emergency numbers (#). If “Phonebook full” is displayed, erase other stored items from the phonebook memory.
B
Beth TurnerAug 21, 2025
What to do if my Panasonic KX-TS880EX Telephone display is blank?
- S
  Stacey Allen DVMAug 21, 2025
  If the display on your Panasonic Telephone is blank, install new batteries.
S
Steven WeeksAug 25, 2025
Why is the LCD display response slow on my Panasonic Telephone?
- A
  Amy HowardAug 26, 2025
  A slow LCD display response on your Panasonic Telephone can be due to a low contrast setting or low batteries. Try changing the LCD contrast setting to a higher level or install/replace the batteries.
B
Bob JacobsAug 27, 2025
Why can't I program items on my Panasonic KX-TS880EX?
- M
  Mr. Eric Palmer MDAug 27, 2025
  You cannot program items on your Panasonic Telephone when the handset is off the cradle, while viewing caller information, or when “ ” or “W” is displayed. Also, do not pause for over 60 seconds while programming.
J
John SmithAug 30, 2025
What to do if my Panasonic KX-TS880EX rings during programming?
- T
  Tammy HernandezAug 31, 2025
  If your Panasonic Telephone starts to ring during programming or searching, answer the call and start again after hanging up.
A
Alexandra MillerSep 2, 2025
Why is information erased from the redial list on my Panasonic Telephone?
- J
  Jennifer CarpenterSep 2, 2025
  If the “ ” icon flashes on your Panasonic Telephone, replace the batteries as soon as possible to prevent the information stored in the redial list from being erased.
S
Sarah HarrisSep 5, 2025
Why does the display exit the caller list on my Panasonic KX-TS880EX Telephone?
- C
  Cristina SpencerSep 6, 2025
  If the display exits the caller list on your Panasonic Telephone, do not pause for over 60 seconds while searching.
T
timothy27Sep 9, 2025
Why doesn't the number of missed calls display on my Panasonic Telephone?
- M
  Mary RobinsonSep 9, 2025
  If the number of missed calls does not display during standby mode on your Panasonic Telephone, the number of missed calls will be displayed when you enter the caller list, provided there are unviewed missed calls.
T
Thomas AndersonSep 12, 2025
What to do if liquid entered my Panasonic Telephone?
- J
  Jennifer FriedmanSep 12, 2025
  If liquid or moisture has entered your Panasonic Telephone, disconnect the telephone line cord from the unit. Remove the batteries and let the unit dry for at least 3 days. After it is completely dry, reconnect the telephone line cord and insert the batteries.

Panasonic KX-TS880EX Specifications

General

Type	Corded Phone
Design	Desktop
Speakerphone	Yes
Caller ID	Yes
Display	LCD
Ringer Volume Control	Yes
Redial	Yes
Wall Mountable	Yes
Call Waiting	Yes
Handset Volume Control	Yes
Flash	Yes
Pulse/Tone Switchable	Yes
Dialing	Tone/Pulse
Phonebook	Yes
Memory	50 Numbers