Panasonic KX-TVM50 - Page 46

6
to cancel call forwarding, then go to
step 8.
4. Enter the extension number of the
transfer destination, then go to step 8.
5.
1
to set telephone number 1, then go
to step 8.
2
to set telephone number 2, then go
to step 8.
3
to set another telephone number.
6. Enter the outside line access number
needed for making outside calls.
7. Enter the outside party’s telephone
number (including area code if needed).
8.
2
to accept.
9. Go on-hook.
Note
• This feature is only available with
Panasonic KX-T series PBXs using
DPT Integration. For more
information, consult your System
Administrator.
• The number of digits that can be
stored for outside telephone
numbers depends on the PBX being
used. For more information, consult
your System Administrator or
System Manager.
46 Subscriber’s Manual Document Version 3.0 2010/07
5.15 Remote Call Forwarding