7.2 Programming Your
Extension for
Conversation Recording
Two-way Recording (TWR) Button
Assignment
Follow the procedure below to assign a
TWR button on your extension.
1. Enter PITS Programming:
a. While on-hook, press the
PROGRAM button or set the
MEMORY switch to "PROGRAM".
b. Enter [99]. (This step is not needed
for KX-TE and KX-TA PBXs.) The
display changes to PT-PGM Mode.
2. Press the Flexible (CO or DSS/BLF)
button that you want to assign as the
TWR button.
3. KX-TD500: [90]
KX-TD1232/KX-TD816 G, SL, NE, FR,
E, AL: [83]
KX-TD1232/KX-TD816 CE, JT, SA, NL,
SP, NZ, RU, PD: [83]
KX-TD1232/KX-TD816 C, BX, HK, X,
X-BR, DBX, ML, BXDD: [90]
KX-TDN1232, KX-TD88 CN: [90]
KX-TD612: [83]
KX-TE and KX-TA: [90]
Screen output: 2Way-Rec:
4. Dial the Voice Mail extension number.
Screen output: 2Way-Rec: _ _ _
(_ _ _ = The extension number you
entered).
5. Press the STORE button.
6. To exit the Personal Programming
mode, press the PROGRAM button or
set the MEMORY switch to "SET".
Two-way Transfer (TWT) Button
Assignment
Follow the procedure below to assign a
TWT button on your extension.
1. Enter PITS Programming:
a.
While on-hook, press the
PROGRAM button or set the
MEMORY switch to "PROGRAM".
b. Enter [99]. (This step is not needed
for KX-TE and KX-TA PBXs.) The
display changes to PT-PGM Mode.
2. Press the Flexible (CO or DSS/BLF)
button that you want to assign as the
TWT button.
3. KX-TD500: [91]
KX-TD1232/KX-TD816 G, SL, NE, FR,
E, AL: [84]
KX-TD1232/KX-TD816 CE, JT, SA, NL,
SP, NZ, RU, PD: [84]
KX-TD1232/KX-TD816 C, BX, HK, X,
X-BR, DBX, ML, BXDD: [91]
KX-TDN1232, KX-TD88 CN: [91]
KX-TD612: [84]
KX-TE and KX-TA: [91]
Screen output: 2Way-Trans:
4. Dial the Voice Mail extension number.
Screen output: 2Way-Trans: _ _ _
(_ _ _ = The extension number you
entered).
5. Press the STORE button.
6. To exit the Personal Programming
mode, press the PROGRAM button or
set the MEMORY switch to "SET".
62 Subscriber’s Manual Document Version 3.0 2010/07
7.2 Programming Your Extension for Conversation Recording
To Next Page
Loading...
