Panasonic KX-TVM50 - Page 61

Live Call Screening Private/
Hands-Free Mode Assignment
This program assigns a VPS response for
when a message is being left in a mailbox.
It determines whether an alert tone is sent
or whether the recorded message is played
through the built-in speaker of the
extension. The default mode is hands-free.
1. Enter Personal Programming:
a. While on-hook, press the
PROGRAM button or set the
MEMORY switch to "PROGRAM".
b. Enter [99]. (This step is not needed
for KX-TE and KX-TA PBXs.) The
display changes to PT-PGM Mode.
2. Enter the code that corresponds to the
desired mode.
For Hands-free mode:
KX-TD500: [71]
KX-TD1232/KX-TD816 G, SL, NE, FR,
E, AL: [
11]
KX-TD1232/KX-TD816 CE, JT, SA, NL,
SP, NZ, RU, PD: [
11]
KX-TD1232/KX-TD816 C, BX, HK, X,
X-BR, DBX, ML, BXDD: [71]
KX-TDN1232, KX-TD88 CN: [71]
KX-TD612: [
11]
KX-TE and KX-TA: [#11]
For Private mode:
KX-TD500: [72]
KX-TD1232/KX-TD816 G, SL, NE, FR,
E, AL: [
12]
KX-TD1232/KX-TD816 CE, JT, SA, NL,
SP, NZ, RU, PD: [
12]
KX-TD1232/KX-TD816 C, BX, HK, X,
X-BR, DBX, ML, BXDD: [72]
KX-TDN1232, KX-TD88 CN: [72]
KX-TD612: [
12]
KX-TE and KX-TA: [#12]
Screen output: Hands-Free or
Private
3. Press the STORE button.
4. To exit the Personal Programming
mode, press the PROGRAM button or
set the MEMORY switch to "SET".
A single line telephone that is connected to
the same extension as a proprietary
telephone can also be used to monitor an
incoming message (not available for
KX-TA). Be sure that Live Call Screening on
the connected proprietary telephone has
been activated. This feature is useful when
you are using a cordless telephone. A tone
sounds to alert the subscriber that a
message is being recorded. To intercept the
call, flash the hook.
Document Version 3.0 2010/07 Subscriber’s Manual 61
7.1 Programming Your Extension for LCS