To Next PageTo Next PageWhy does my Panasonic KX-WT125 Telephone need charging after only a few calls?
If you charged the batteries for 7 hours, but the beep tones sound, and flashes (needs to be charged) after a few telephone calls, the battery charge contacts may be dirty. Clean the battery charge contacts without damaging them and charge once more. Alternatively, it may be time to change the batteries, so replace them with new ones.
What to do if my Panasonic KX-WT125 Telephone won't dial?
If you cannot dial on your Panasonic Telephone, the number that you dialed may be restricted by the PBX, in which case you should consult your dealer. Another possibility is that the key lock mode is on. To cancel the mode, press for about 2 seconds. It is also possible that the radio channel is busy or a radio communication error occurred, so please try again later.
How to fix Panasonic Telephone handset that doesn't work?
If your Panasonic Telephone handset isn't working, the batteries may be drained. Charge the batteries fully. Alternatively, the power might be off. Re-insert the batteries, and then set the handset on the charger.
Why does my Panasonic KX-WT125 Telephone say 'No Service' and beep?
If your Panasonic Telephone displays 'No Service' and you hear beep tones, it could be due to the handset being out of range. Try moving closer to the CS or try again later. Alternatively, the CS or PBX might be out of service, in which case you should consult your dealer.
Why do I hear two short beeps on my Panasonic KX-WT125 during a conversation?
If you hear two short beeps during a conversation on your Panasonic Telephone, the radio signal is weak. Try moving closer to the CS.
Why doesn't my Panasonic KX-WT125 handset ring?
If your Panasonic Telephone handset does not ring, the ringer volume may be set to 'Off'. Adjust the ringer volume level. Alternatively, Silent Mode may be set to 'On' or displayed on the LCD. Press for more than 2 seconds to cancel the Silent Mode.
What to do if my Panasonic Telephone won't make or receive calls?
If you cannot make or receive calls on your Panasonic Telephone, it may be because the handset is out of range, or the CS is busy. Try moving closer to the CS or try again later. It could also be that the radio channel is busy, or a radio communication error occurred, so try again later.
Why can't I dial on my Panasonic IP Phone?
General| Range (Outdoors) | 300 meters |
|---|---|
| Range (Indoors) | 50 meters |
| Number of Handsets | 1 |
| Answering Machine | No |
| Display | LCD |
| Headset Jack | Yes |
| Power | AC adapter |
