Panasonic LP-ADP50 - Other Settings; Information

23
2-4-5 Other settings
Sets for the screen adjustment panel.
Item Description Setting range Default value
OSD Transparency Sets the transmission effect of the OSD (on-screen display)
menu.
0 to 5 0
OSD Timeout Sets the time-out period to exit from the OSD menu.
The value can be adjusted in 5-second increments.
5 to 100 10
Factory Reset Resets to the factory default of the OSD menu of the touch
panel console.
- -
2-4-6 Information
Displays the value detected from the input signal.
Item Description
Resolution Displays the resolution.
H. Freq. Displays the horizontal synchronization frequency.
V. Freq. Displays the vertical synchronization frequency.
V. Total Displays the numbers of the vertical total lines .
FW Ver Displays the firmware version.
ME-LPADP50-IM-3