What to do if my Panasonic Label Maker does not start?
If your Panasonic Label Maker isn't starting, make sure the power cable is securely connected. Also, verify that the key switch is turned on. Ensure that the power supply is working. If none of these steps work, the fuse might be blown and needs replacing.
What to do if my Panasonic Industrial Equipment power supply is not turned on?
If your Panasonic Industrial Equipment's power supply isn't turning on, there are several potential causes: * The power cable might not be properly connected, so ensure it's securely plugged in. * The key switch might not be turned on; make sure to turn it on. * The power supply itself might not be providing power; check the power supply. * The fuse could be blown; replace it by following the 'Safety / Setup / Maintenance Guide'.
General| Cutter | Automatic |
|---|---|
| Printing Method | Thermal Transfer |
| Connectivity | USB |
| Power Source | AC Adapter, Rechargeable Li-ion Battery |
| Display | LCD |
| Battery Life | Varies based on usage |
To Next Page
