Panasonic LS-400 Series - Page 9

9
Digital Laser Sensor LS-400 SERIES
SPECIFICATIONS
Sensor heads
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and
Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
3) LS-H22(F) is the set model No. for LS-H21(F) long sensing range spot reective type sensor head combined with the LS-MR1 lens attachment for line
reective type. Hence, LS-H21(F) appears on the sensor head itself.
4) The sensing range is the value for the RF-330 [RF-230 for the LS-H92(F)] reector. In addition, the sensing range is the possible setting range for the
reector. The sensor can detect an object less than 0.1 m 0.328 ft [LS-H92(F): 0.2 m 0.656 ft] away. Note that if there are white papers or specular
objects near the sensor head, reected light from these objects may be received. In such cases, use the M.G.S. function of the amplier unit to change
the response time or incident light sensitivity.
5) Cable cannot be extended.
Type
Coaxial retroreective Diffuse reective
Class 2 Class 1
Long sensing range spot reective
Long sensing range
line reective
Class 2 Class 1
Model No.
IEC / JIS / GB standards
conforming type
LS-H92 LS-H91 LS-H91-A LS-H21 LS-H21-A LS-H22(Note 3)
Item
FDA (Note 2) / IEC / JIS
standards conforming type
LS-H92F LS-H91F LS-H91F-A LS-H21F LS-H21F-A LS-H22F(Note 3)
CE marking directive compliance
EMC Directive, RoHS Directive
Applicable ampliers
LS-401(P), LS-401(P)-C2, LS-403
Sensing range
U-LG mode
0.2 to 30 m
0.656 to 98.425 ft (Note 4)
0.1 to 7 m
0.328 to 22.966 ft (Note 4)
0.1 to 5 m
0.328 to 16.404 ft (Note 4)
30 to 1,000 mm
1.181 to 39.370 in
30 to 500 mm
1.181 to 19.685 in
30 to 1,000 mm
1.181 to 39.370 in
STD mode
0.2 to 20 m
0.656 to 65.617 ft (Note 4)
0.1 to 5 m
0.328 to 16.404 ft (Note 4)
0.1 to 3 m
0.328 to 9.843 ft (Note 4)
30 to 500 mm
1.181 to 19.685 in
30 to 250 mm
1.181 to 9.843 in
30 to 500 mm
1.181 to 19.685 in
FAST mode
0.2 to 10 m
0.656 to 32.808 ft (Note 4)
0.1 to 3 m
0.328 to 9.843 ft (Note 4)
0.1 to 1 m
0.328 to 3.281 ft (Note 4)
30 to 300 mm
1.181 to 11.811 in
30 to 150 mm
1.181 to 5.906 in
30 to 300 mm
1.181 to 11.811 in
H-SP mode
Operation indicator Orange LED (lights up when the amplier output is ON)
Laser emission indicator Green LED (lights up during laser emission)
Spot-shape adjuster
–
Multi-turn adjuster
Environmental resistance
Protection IP40 (IEC)
Ambient temperature –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –20 to +70 °C –4 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 ℓx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
Shock resistance 100 m/s
2
acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting element
IEC / JIS / GB standards
conforming type
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
Max. output: 3 mW
Peak emission wavelength: 655 nm 0.026 mil
Red semiconductor laser,
Class 1 (IEC / JIS / GB)
Max. output: 1 mW
Peak emission wavelength:
655 nm 0.026 mil
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
Max. output: 3 mW
Peak emission wavelength:
655 nm 0.026 mil
Red semiconductor laser,
Class 1 (IEC / JIS / GB)
Max. output: 1 mW
Peak emission wavelength:
655 nm 0.026 mil
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
Max. output: 3 mW
Peak emission wavelength:
655 nm 0.026 mil
FDA (Note 2) / IEC /
JIS standards
conforming type
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
Max. output: 3 mW
Peak emission wavelength: 655 nm 0.026 mil
Red semiconductor laser,
Class 1 (FDA / IEC / JIS)
Max. output: 1 mW
Peak emission wavelength:
655 nm 0.026 mil
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
Max. output: 3 mW
Peak emission wavelength:
655 nm 0.026 mil
Red semiconductor laser,
Class 1 (FDA / IEC / JIS)
Max. output: 1 mW
Peak emission wavelength:
655 nm 0.026 mil
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
Max. output: 3 mW
Peak emission wavelength:
655 nm 0.026 mil
Material Enclosure: PBT (Mounting part: PEI), Lens cover: Acrylic
Cable 0.1 mm
2
, single core two parallel shielded cables, 2 m 6.562 ft long (Connector for amplier attached) (Note 5)
Weight
Net weight: 30 g approx.
Gross weight: 40 g approx.
Net weight: 30 g approx.
Gross weight: 45 g approx.
Net weight: 30 g approx.
Gross weight: 40 g approx.
Net weight: 35 g approx.
Gross weight: 45 g approx.
Accessories
RF-230(Reector):
1 pc.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.
RF-330(Reector):
1 pc.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.
RF-330(Reector):
1 pc.
Explanation label: 1 set
Labels are written in
Japanese and Chinese
for compliance with
various standards.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.
Explanation label: 1 set
Labels are written in
Japanese and Chinese
for compliance with
various standards.
LS-MR1
Lens attachment
for line reective
: 1 pc.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.