106
DVQP1242
Focus, Brightness (Exposure) and Colour tone Settings
Adjusting the White Balance
Bracket recording using White Balance
Bracket settings are performed based on the fine adjustment values for White Balance,
and three pictures with different colouring are automatically recorded when the shutter
button is pressed once.
1
Perform fine adjustments of the White Balance in
step
2
of “Performing White Balance fine adjustments”
(→105) and rotate the rear dial to perform the Bracket
setting
• You can also set the bracket by touching [ ]/[ ].
BKTBKT
2
Press [MENU/SET]
3
Press [MENU/SET] to finalise the setting
• You can also press the shutter button halfway to set the White Balance.
●
You can also set the White Balance Bracket in [Bracket] in the [Rec] menu. (→127)
●
This function is not available in the following cases:
• Panorama Shot Mode
• [Glistening Water], [Glittering Illuminations], [Handheld Night Shot], [Soft Image of a Flower]
(Scene Guide Mode)
• When using [Burst]
• When recording 4K photos
• When recording using [Post Focus]
• When taking still pictures while a motion picture is being recorded
• When [Quality] is set to [
], [ ] or [ ]
• When [Multi Exp.] is set
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
