64
DVQP1242
Recording mode
Taking pictures by setting the aperture value and shutter speed
Easily set aperture value / shutter speed for suitable exposure
(One Push AE)
Recording mode:
When the exposure setting is too bright or too dark, you can use one push AE to achieve
a suitable exposure setting.
How to tell if the exposure is not adequate
• If the aperture values and shutter speed blink red when the shutter
button is pressed halfway.
• If the Manual Exposure Assistance (→61) is anything other than
[
] when in Manual Exposure Mode.
Blinks red
1
Assign [One Push AE] to the function button (→47)
2
(When exposure is not adequate) Press the function button
Exposure meter
Change to appropriate exposure
60
2.8 4.0 5.6
15 30 125 250
●
The exposure meter is not displayed in Creative Video Mode.
●
In the following cases, suitable exposure cannot be set.
• When the subject is extremely dark and it is not possible to achieve adequate exposure by
changing the aperture value or shutter speed
• When recording using the flash
• Preview Mode (→62)